Before you buy or mount a hang-on-back filter, it is worth checking a few limits in the manual: how thick the tank rim can be, how low the water can drop and what water temperature the filter is rated for. Fluval’s AquaClear manual gives all three.

Quick answer: The maximum rim thickness is 0.9 in (2.4 cm) for the AC20, AC30, AC50 and AC70, and 1.4 in (3.6 cm) for the AC110. The water level must stay close to the filter output, and the maximum water temperature is 35°C (95°F). The filter is for indoor household use only.
Safety first: Make sure the filter is securely installed before you operate it, and don’t let it run dry. Unplug it before you put your hands in the water.
This is based on the AC110 edition of Fluval’s AquaClear AC Series manual, whose FAQ covers the AC20, AC30, AC50, AC70 and AC110. Check your own manual for your model.
The limits in the manual

| Limit | AC20, AC30, AC50 | AC70 | AC110 |
|---|---|---|---|
| Maximum rim thickness | 0.9 in (2.4 cm) | 0.9 in (2.4 cm) | 1.4 in (3.6 cm) |
| Minimum water level (distance below the bottom of the filter output) | no more than 5/8 in (16 mm) | no more than 1.5 in (38 mm) | no more than 1.5 in (38 mm) |
The manual’s wording for water level is that it should be no more than that distance from the bottom of the filter output. If the water drops further, the filter may not work properly.
Other limits to check
- Water temperature: the manual gives a maximum water temperature of 35°C.
- Fresh or salt water: the manual says the filter may be used with fresh or salt water.
- Not submersible: it is a non-submersible aquarium filter pump. Don’t immerse it.
- Indoors only: it is a household appliance intended for indoor use. Don’t install or store it where it will be exposed to the weather or to freezing temperatures.
- Power: the electrical connection must match the data on the rating label. If you need an extension cord, use one with a proper rating.
Fitting the filter
When you mount the filter, attach the levelling device to the filter case and rotate it until the filter is perfectly level. Use the extension tube if your tank’s depth needs it. The manual also recommends using as many of the intake stems as will fit in your aquarium, because drawing water from deeper in the tank gives the most efficient filtration overall. See our setup guide.
Quick reference
| Question | What the manual says |
|---|---|
| Rim too thick? | Over 0.9 in (2.4 cm) on AC20 to AC70, or over 1.4 in (3.6 cm) on the AC110, it won’t fit |
| Water level low? | Keep it within the distance listed for your model |
| Water too warm? | The manual gives a maximum of 35°C |
| Outdoors or cold? | No. Indoor household use only |
Frequently asked questions
How thick can my tank rim be for an AquaClear?
The manual says the maximum rim thickness is 0.9 in (2.4 cm) for the AC20, AC30, AC50 and AC70, and 1.4 in (3.6 cm) for the AC110.
How low can the water level drop?
For the AC20, AC30 and AC50 the water level should be no more than 5/8 in (16 mm) from the bottom of the filter output. For the AC70 and AC110 it is no more than 1.5 in (38 mm).
What is the maximum water temperature?
The manual gives a maximum water temperature of 35°C.
Can I use an AquaClear in salt water?
The manual says the filter may be used with fresh or salt water.
Can I use it outdoors?
No. The manual says it is intended for indoor household use and shouldn’t be exposed to the weather or to freezing temperatures.
What this page doesn’t cover
This page covers filter equipment only. It doesn’t give fish-health, medication or water-chemistry advice, and it doesn’t describe electrical repair.
Sources and last verified
- Fluval, AquaClear AC Series instruction manual, AC110 edition (official PDF): fluvalaquatics.com
Last verified: November 19, 2026, against the English sections of the PDFs listed above.
